MICC Cable Fixings

To secure MICC Cable, far fewer fixings are required in comparison with other cable types. By using the recommended fixing distances, savings of up to 40% can be achieved on fixing costs compared to conventional fixing distances. Whether fixed on the surface, on a cable tray, behind plaster, in a roof space or suspended ceiling, MICC cable measures up to a real installation cost advantage. The fixing distances shown in the table below represent a saving of up to 40% in comparison with traditional methods of installation practice, where pliable cables are fixed at an average of 225mm (9”) intervals compared to the MICC recommendation of 350mm (14”) centre.

Where considerable lengths of cable are involved, the savings can be very substantial—especially when matched against the cost of the cable itself.

MICC Recommended Fixing Distances - Fixing Distances Vertical

Surface mount verticallySurface mount vertically on cable traySurface mount vertically behind plasterSurface mount vertically in roof space
Cable DiameterSurfaceCable TrayBehind PlasterIn Roof Space
Less than 9mm550mm800mm600mm550mm
9mm up to 20mm600mm1000mm-800mm
Over 20mm650mm1200mm-1000mm

MICC Recommended Fixing Distances - Fixing Distances Horizonal

Surface mount horizontallySurface mount horizontally on cable traySurface mount horizontally behind plasterSurface mount horizontally in roof space
Cable DiameterSurfaceCable TrayBehind PlasterIn Roof Space
Less than 9mm450mm800mm600mm550mm
9mm up to 20mm500mm1000mm-800mm
Over 20mm550mm1200mm-1000mm

LSF Pyro Clips and Saddles

The latest addition is the new range of LSF and Halogen Free Cable Clips and Saddles. In addition to mechanical strength and fire safety advantages, they are colour matched against MICC Cables and fixing sizes are easily visible when using them on site.

Pyro Strap

Two types of Pyro Strap are available, pre-punched or solid copper. Both types are available either in bare copper or with an additional plastic covering (Orange, Red or White).